The pallet is the most underestimated component in the supply chain. It may look like a simple wooden platform, but choosing the wrong pallet can damage your goods, slow down your forklifts, and make your entire racking system incompatible. At LT Group, with 27 years of experience integrating distribution centers, we see every day how a seemingly minor pallet decision becomes an operational bottleneck that costs thousands of pesos a month. This guide gives you 7 key factors to make an engineering-informed choice.

Fig. 1. The right pallet ensures stability in racking, forklift compatibility, and load protection.
What is a pallet, and why does it determine your warehouse’s efficiency?
A pallet is a horizontal platform—typically made of wood, plastic, or metal—designed to consolidate goods into a stable unit load that can be handled by forklifts, pallet jacks, or automated systems. Its function goes well beyond “holding boxes”: it standardizes dimensions so the entire storage system—racking, conveyors, and vehicles—operates on a common foundation.
In a typical distribution center, the wrong pallet creates three problems at once: (1) instability in the racking, with a risk of falling loads; (2) incompatibility with material handling equipment, forcing slow or dangerous maneuvers; and (3) wasted space because its dimensions do not match the specified beam width. Multiply that by the thousands of pallets circulating each month, and the cost becomes a systemic issue.
International regulations recognize different manufacturing standards. The Euro pallet, for example, is certified under UIC 435-2 and identified by the EUR mark branded into the wood. Not every 1,200 x 800 mm pallet is a Euro pallet: only those meeting that technical specification offer the expected strength and durability. For guidance on safe unit-load handling, OSHA sets out clear guidelines on pallet structural integrity in storage environments.
The 7 factors that determine which pallet your operation needs
Choosing a pallet is not as simple as ordering “the standard one.” These seven criteria determine the right pallet for your specific operation:
1. Load weight. A pallet for cement bags (1,500 kg) needs a different structural capacity than one for cereal boxes (400 kg). The standard Euro pallet supports up to 1,500 kg under a static load and 1,000 kg under a dynamic load. Check the rated capacity before you buy.
2. The storage system where it will be used. Selective racking accepts virtually any pallet type. Gravity-flow racking works only with type 1 pallets, which have a continuous bottom runner in the direction of travel. Drive-in racking requires pallets that rest on both rails of the storage lane. Using the wrong pallet in the wrong system brings operations to a halt.
3. Forklift and fork type. Standard forks are approximately 1,150 mm long. If your pallet has openings that are too narrow or poorly positioned blocks, the forklift operator will waste time lining up—or may be unable to lift the load without damaging the pallet.
4. Warehouse environmental conditions. Cold storage, high humidity, and chemical exposure. Wood absorbs moisture and deteriorates in extreme cold. Plastic or metal pallets are a solution for these environments, where wood fails prematurely.
5. Turnover and reuse frequency. Single-use (disposable) pallets cost less per unit but are destroyed after the first cycle. Industrial-grade returnable pallets pay for themselves in 8–12 rotations. For closed-loop operations, durable pallets always win on total cost.
6. Industry sanitation requirements. Food, pharmaceutical, and export operations require certified pallets. Plastic pallets are preferable in environments where cleanliness and the absence of splinters are mandatory. Wooden pallets for export require phytosanitary treatment under ISPM 15.
7. Compatibility with automated conveyors. If your pallet will travel on automated rollers, its bottom runners must be continuous and aligned with the direction of flow. Type 2 and type 3–4 wooden pallets often fail on roller conveyors because their blocks do not provide a continuous travel surface.
Pallet types by material: wood, plastic, and metal
Each material has advantages and limitations. The right choice depends on the factors above, not the buyer’s preference:
- Wooden pallets: They account for 90% of the market. Affordable, repairable, and recyclable. The Euro pallet (1,200 x 800 mm) and the American pallet (1,200 x 1,000 mm) are the dominant standards. Their main drawbacks: they absorb moisture, produce splinters, and weigh more than plastic pallets.
- Plastic pallets: Lighter than wood, unaffected by moisture, and easy to sanitize. Ideal for the food and pharmaceutical industries and aseptic environments. Their upfront cost is higher, but in demanding conditions their service life is three times that of a wooden pallet. At LT Group Plastics, you will find returnable packaging solutions that complement your pallet strategy.
- Metal pallets: Maximum strength for extremely heavy loads (2,000+ kg). Common in the automotive and metalworking industries. They are the most expensive, but also the most durable. Their high weight increases transportation costs on every trip.
Pallet types by design: reversible, double-deck, two-way, and four-way
Beyond its material, a pallet’s construction determines which equipment can handle it and which storage systems it works in:
- Single-face (nonreversible): Only the top face is designed to support a load. The bottom has blocks or runners. Most pallets in circulation are of this type. They cannot be used in gravity-flow racking unless the bottom runner is continuous in the direction of flow.
- Reversible double-deck: Both faces are identical and can support a load. Heavier and more expensive, but they eliminate the mistake of placing a pallet upside down. Useful in operations with high turnover of temporary staff.
- Two-way entry: Forklift forks can enter from only two opposing sides. The operator must position the forklift correctly. These pallets are structurally more rigid but less versatile.
- Four-way entry: Forks can enter from all four sides. Maximum maneuvering versatility. The most common design in modern distribution centers. It allows forklift access regardless of the pallet’s orientation in the rack.
Standard dimensions: Euro pallets, American pallets, and half pallets
Standardizing your pallet dimensions is the first step toward optimizing your storage layout. These are the most widely used formats in Mexico and international trade:
- Euro pallet (1,200 x 800 mm): The European standard. Ideal for selective racking, flow racking, and automated systems. Its continuous bottom runner allows friction-free travel on roller conveyors. It is the most versatile pallet on the market.
- American pallet (1,200 x 1,000 mm): Standard in the United States and widely used in Mexico for bilateral trade. Compatible with selective racking. It may cause problems in flow racking if its runners do not provide a continuous surface in the direction of flow.
- 1,200 x 1,200 mm pallet: Common in the chemical and construction industries. It provides a larger support surface but uses rack space less efficiently because it extends beyond the standard beam width.
- Half pallet (800 x 600 mm): Exactly half the size of a Euro pallet. Frequently used in retail and supermarkets for point-of-sale displays. Storing it in racking requires additional crossbars or slave pallets to support it.
The dimensions you choose must match the rack type. For example, in standard selective racking, beams have approximately 2,700 mm of usable length, allowing two Euro pallets (2 x 800 = 1,600 mm deep) or two American pallets (2 x 1,000 = 2,000 mm) with sufficient maneuvering clearance. Choosing dimensions without checking rack compatibility means planning for wasted space. Visit our storage systems section to see how we integrate pallets, racking, and forklifts into a single optimized layout.
Common mistakes that damage your goods and racking
These are the five most frequent mistakes we identify when auditing pallet use in industrial warehouses:
- Using damaged or splintered pallets: A pallet with a broken block does not distribute weight correctly across the rack beam. The result: beam deformation, load instability, and the risk of a cascading collapse. Visually inspecting each pallet before placing it in the rack is a nonnegotiable procedure.
- Exceeding load capacity: A pallet designed for 1,000 kg and loaded with 1,500 kg may not collapse immediately—but it suffers fatigue, deforms, and fails when you least expect it, typically while a load is being retrieved at height.
- Mixing incompatible pallet types in the same system: If your flow rack is configured for Euro pallets with continuous runners, introducing an American pallet with separate blocks will jam the gravity flow and require manual intervention. Each storage system accepts specific pallet types.
- Ignoring load overhang: If goods extend more than 50 mm beyond the pallet edge, they may hit the upright of the adjacent bay when entering the rack. Over time, these repeated impacts weaken the structure.
- Failing to train staff on pallet–rack compatibility: An operator who puts any pallet in any position because “it fits” creates structural risk that builds up unnoticed until a beam eventually gives way. Training is not optional.
Conclusion: the foundation of your supply chain
The pallet is the point of contact between your product and your entire logistics system. A poorly chosen pallet compromises every link: the rack supporting it, the forklift moving it, and the goods it carries. A pallet correctly specified for your actual operation—not an idealized one—eliminates friction you may not even have known existed.
At LT Group, we do not leave pallet selection until the end of the project as an afterthought. We integrate it into the conceptual layout design, ensuring that racking, material handling equipment, and the unit load form a coherent system. In logistics, the details no one notices determine whether your operation is profitable. Visit our engineering services to learn how we design your entire distribution center—including the right pallet—from day one.
Are your pallets slowing down your operation?
Our engineers analyze your storage system and recommend the right pallet for your racking, forklifts, and material flow.
{“@context”:”https://schema.org”,”@type”:”BlogPosting”,”headline”:”industrial Pallet Guide: 7 Key Factors for Choosing the Right Pallet”,”image”:[“https://images.unsplash.com/photo-1586528116311-ad8dd3c8310d?q=80&w=800&auto=format&fit=crop”],”datePublished”:”2026-05-21T20:00:00+00:00″,”dateModified”:”2026-05-21T20:00:00+00:00″,”author”:{“@type”:”Organization”,”name”:”LT Group”,”url”:”https://logistictrade.com/en/”},”publisher”:{“@type”:”Organization”,”name”:”LT Group (Logistic Trade)”,”logo”:{“@type”:”ImageObject”,”url”:”https://logistictrade.com/en/wp-content/uploads/2025/10/LT-Group.svg”}},”description”:”A complete guide to industrial pallets: wood, plastic, and metal types, standard dimensions, rack compatibility, and the 7 factors for choosing the right pallet.”}
