SAFETY AND REGULATORY COMPLIANCE
Industrial Racking Maintenance and Inspection: Safety and NOM-006-STPS Compliance
Every day, industrial racking supports hundreds of tons above aisles used by warehouse staff and forklift operators. A single beam deformed by overloading, or an upright weakened by a forklift impact, can trigger a catastrophic chain-reaction collapse, causing losses in the millions and potentially fatal injuries. In Mexico, NOM-006-STPS-2014 establishes clear civil and criminal responsibilities for companies regarding warehouse safety conditions. At LT Group, we provide technical inspections, expert structural assessments, and maintenance agreements nationwide. Here is how to protect your operation.

Fig. 1. Periodic technical inspections detect millimeter-scale deformation before a structural failure occurs.
What NOM-006-STPS Requires for Shelving and Racking
Mexico’s Ministry of Labor and Social Welfare (STPS) specifies the following mandatory requirements in Official Mexican Standard NOM-006-STPS-2014:
- Documented periodic inspections: A signed inspection log must demonstrate that the structure remains in a safe condition.
- Visible maximum load capacity: Every row of racking must carry permanent metal plates indicating the maximum allowable weight per level and per span.
- Immediate preventive and corrective maintenance: Repairing uprights or beams with improvised welded patches or structural profiles not certified by the original manufacturer is strictly prohibited.
- Structural stability and anchors: Ongoing verification that anchor bolts have not loosened, cracked, or sheared from vibration or impact.
The 4 Visual Inspection Risk Levels (Damage Traffic Light System)
Following the European EN 15635 methodology and ANSI standards, rack deformation is classified into three alert levels:
- Green Level (Monitor): Deformation of less than 3 mm in uprights or 5 mm in beams. Must be recorded and monitored at the next monthly inspection.
- Amber Level (Moderate Risk): Upright deformation between 3 mm and 5 mm. Replacement of the damaged component must be scheduled within no more than 4 weeks; the load must not be increased.
- Red Level (Critical Danger): Deformation exceeding 5 mm or cracks in connector welds. Requires immediate unloading of the affected levels and taking the bay out of service until the component is replaced with an original part.
Impact Protection: The Investment That Prevents Major Losses
Forklifts cause 90% of structural damage in warehouses while turning corners and entering aisles. Equipping your facility with high-strength steel or polymer barriers absorbs impact energy before it reaches the rack upright.
Structural Reports and Expert Assessments for Civil Protection Authorities
If your warehouse operates in areas with demanding regulatory requirements, such as Tijuana, Mexico City, Monterrey, or Guadalajara, civil protection authorities periodically require a structural safety report endorsed by a registered Structural Safety Co-Responsible Expert (Perito Corresponsable en Seguridad Estructural). At LT Group, our certified engineers prepare structural calculation reports, as-built drawings, and official reports.
When Were Your Industrial Racks Last Inspected?
Protect your personnel and avoid STPS fines. Schedule a safety audit and expert technical assessment with LT Group’s engineering team today.
{“@context”:”https://schema.org”,”@graph”:[{“@type”:”BlogPosting”,”headline”:”industrial Racking Maintenance and Inspection: Safety and NOM-006-STPS Compliance”,”image”:[“https://logistictrade.com/en/wp-content/uploads/diseno-almacen-1.png”],”datePublished”:”2026-09-28T18:45:00+00:00″,”dateModified”:”2026-09-28T18:45:00+00:00″,”author”:{“@type”:”Organization”,”name”:”LT Group”,”url”:”https://logistictrade.com/en/”},”publisher”:{“@type”:”Organization”,”name”:”LT Group (Logistic Trade)”,”logo”:{“@type”:”ImageObject”,”url”:”https://logistictrade.com/en/wp-content/uploads/2025/10/LT-Group.svg”}},”description”:”A guide to industrial racking maintenance, technical inspection and safety in Mexico. Prevent collapses and penalties, and comply with NOM-006-STPS.”},{“@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”How Often Should Racking Be Inspected Under the Applicable Standards?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Weekly visual inspections by in-house personnel and a thorough annual technical audit by expert engineers are recommended.”}},{“@type”:”Question”,”name”:”Is It Legal to Weld Damaged industrial Racking?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”No. STPS regulations and international standards prohibit improvised welding on uprights or beams; the damaged component must be replaced with a new original part.”}}]}]}
